Freewing Electronic Main Gear Retract for 4.1mm Diameter Shafts - Type A
- Regular price
- $1699
- Sale price
- $1699
- Regular price
- $
- (Save $-16.99)
- Unit price
- /per
Pay with Affirm on orders over $250. Check your purchasing power
-
Overview
-
Q&A
Overview
Electronic Main Gear Retract for 4.1mm Diameter Shafts - Type A
Note: These retracts were used on the T-45's sold before July 2019.
Specifications:
- Body material: plastic
- Trunion material: metal
- Strut diameter: accepts shafts of 4.1mm in diameter
This retract is used on the main landing gear of the following Freewing and FlightLine aircraft:
- PJ50
- B-24
- Avanti S
- P-51
- AT-6
- SBD-5
- Stinger 90
- F-15
- Eurofighter V2
- F/A-18 V2
- SU-35
- L-39
- Mig 21
- Mosquito
- Me262
- Venom
- T-45
- 1600mm P-38
- 1400mm OV-10

Product Specifications:
Gear Material |
Nylon/ABS |
Operating Voltage Range |
4.8V - 6V |
Speed (4.8V) |
1.8 sec @ 90 deg |
Speed (6V) |
1.6 sec @ 90 deg |
Torque (4.8V) |
5.0 kg/cm (70 oz/in) |
Torque (6V) |
5.5 kg/cm (76 oz/in) |
Current Draw at Idle (4.8V) |
100mA |
Current Draw at Idle (6.0V) |
130mA |
Maximum Load Current (4.8V) |
900mA |
Maximum Load Current (6.0V) |
1100mA |
Current Draw Operating (No Load) |
10mA |
Dimensions (L x W x H) |
66 x 38 x 32.2mm |
Weight |
43g (1.51oz) |
Lead Length |
360mm |
Q&A
Product questions & answers
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center
Thank you for posting a question!
Your question will appear on the site once we've answered it.
Freewing Electronic Nose Gear Retract with 4.1mm Shaft Type B
SKU: ET8202
VIEW PRODUCT


Freewing 1410mm P-51D Left Landing Gear Strut and Tire
SKU: FW301110813
VIEW PRODUCT


Freewing Electronic Nose Retract for 5.1mm Diameter Shafts - Type E
SKU: ET8403
VIEW PRODUCT


Freewing 80mm EDF Avanti S Main Landing Gear Connecting Pin
SKU: FJ21211088
VIEW PRODUCT


FlightLine 12x7 3-Blade Electric Propeller (Reverse) - Yellow Tip
SKU: P412072R
VIEW PRODUCT


Freewing Electronic Nose Gear Retract with 4.1mm Shaft Type B2
SKU: ET8201
VIEW PRODUCT


Lemon 7-Channel DSMX Compatible Receiver with Diversity Antenna
SKU: LM0081
VIEW PRODUCT


Freewing Electronic Main Gear Retract for 4.1mm Diameter Shafts - Type A
- Regular price
- $1699
- Sale price
- $1699
- Regular price
- $
- (Save $-16.99)
- Unit price
- /per
Pay with Affirm on orders over $250. Check your purchasing power
Adding product to your cart
Customer Reviews



- Ease of Use / Assembly Easy Very DifficultDifficultAverageEasyVery Easy
- Performance Good Very WeakWeakOkayGoodVery Good
- Quality Good Very WeakWeakOkayGoodVery Good
- Value for the Money Good Very LowLowOkayGoodVery Good
- Reviews
- Questions
Thank you for submitting a review!
Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Freewing Electronic Main Gear Retract
direct fit into the V1 Freewing ME262
- Quality Very WeakWeakOkayGoodVery Good
- Value for the Money Very LowLowOkayGoodVery Good
- Ease of Use / Assembly Very DifficultDifficultAverageEasyVery Easy
- Performance Very WeakWeakOkayGoodVery Good

Not quite the same
The main issue I have with these is they are not the same as the stock retracts that are installed with the 1410mm p-51. They are slightly smaller, the shafts...read moreThe main issue I have with these is they are not the same as the stock retracts that are installed with the 1410mm p-51. They are slightly smaller, the shafts for the landing gear struts do not fit in the holes and had to be drilled out, and they did not have enough strength to push in the landing light switch when retracting. so I had to tape the light switch up so the gear could fully retract. I contacted customer support about it, they replied and we went a couple of rounds of emails and then they stopped. I had no issue with the complete landing gear system I purchased another time. One good thing is that you can purchase the shafts that connect the strut to the retract separately if and when they get too bent.
- Quality Very WeakWeakOkayGoodVery Good
- Value for the Money Very LowLowOkayGoodVery Good
- Ease of Use / Assembly Very DifficultDifficultAverageEasyVery Easy
- Performance Very WeakWeakOkayGoodVery Good

RETRACT
WORKS AS IT SHOULD
- Quality Very WeakWeakOkayGoodVery Good
- Value for the Money Very LowLowOkayGoodVery Good
- Ease of Use / Assembly Very DifficultDifficultAverageEasyVery Easy
- Performance Very WeakWeakOkayGoodVery Good

Needs improvement
Not going into issues with new plane past 30 warranty even though it wasn't assembled within warranty time. Seems Motion has enough customers & doesn't care about what 1st time...read moreNot going into issues with new plane past 30 warranty even though it wasn't assembled within warranty time. Seems Motion has enough customers & doesn't care about what 1st time customers need. Also replacement parts were not for my version plane, I understand things happen. But how's this for help - past 30days no warranty even though a problem with plane as unboxed, too bad for you go away. That's what I got for $500 plane & $509 NX8. Feel good buying from them ?
- Quality Very WeakWeakOkayGoodVery Good
- Value for the Money Very LowLowOkayGoodVery Good
- Ease of Use / Assembly Very DifficultDifficultAverageEasyVery Easy
- Performance Very WeakWeakOkayGoodVery Good

Retract
The retract works. The Avanti needs a larger sized retract.
- Quality Very WeakWeakOkayGoodVery Good
- Value for the Money Very LowLowOkayGoodVery Good
- Ease of Use / Assembly Very DifficultDifficultAverageEasyVery Easy
- Performance Very WeakWeakOkayGoodVery Good

Both main gear servos have stripped out.
Just replaced the striped out left main gear servo. Operated the gear a few times to make sure I had the left was lined up. The right side quit working....read moreJust replaced the striped out left main gear servo. Operated the gear a few times to make sure I had the left was lined up. The right side quit working. I will replace the the right side one time. Another failure and I will scrap the airplane.
- Quality Very WeakWeakOkayGoodVery Good
- Value for the Money Very LowLowOkayGoodVery Good
- Ease of Use / Assembly Very DifficultDifficultAverageEasyVery Easy
- Performance Very WeakWeakOkayGoodVery Good
-
Overview
-
Q&A

Freewing Electronic Main Gear Retract for 4.1mm Diameter Shafts - Type A
ARF BUNDLE - ARF plus Electronics - $219.00
- Regular price
- $1699
- Sale price
- $1699
- Regular price
- $
- (Save $-16.99)
- Unit price
- /per

Hobby Squawk Community Forum
visit forum
RC Knowledge Blog
visit blog
Guidance & advice for beginners
Find out more