70mm Freewing F-35 Lightning II EDF V2 with Electronic Retracts and Vectored Thrust - Receiver Ready (PNP) - FJ20111P
Discontinued Product
This product is being discontinued. Product and replacement parts will be available only while remaining inventory lasts.
This is the new version 2 of the top selling Freewing F-35 Lightning II Joint Strike Fighter. The primary change in this new version 2 is the landing gear. The servo actuated landing gear found in version 1 has been replaced with full electronic retracts with metal trunnions. Now you can enjoy this ultra-maneuverable, vectored thrust jet even more knowing that the upgraded landing gear is more durable and more reliable.
Visit the Official Freewing F-35 Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Features:
- Model officially licensed by Lockheed Martin
- 12-blade fan and 60 Amp ESC
- Retractable main landing gear with full electronic retract and black anodized metal trunnion (replaces older servo actuated retract design)
- 360 degree vectored thrust for incredible maneuvers like flat spins, flip turns, and high alpha flight
- Super scale features including Joint Strike Fighter graphics, hand painted pilot figure, detailed cockpit, and independently controlled elevators
- Shock-absorbing, steerable nose gear will protect the plane on hard landings and make it easier to maneuver during taxi and takeoff
- 3000Kv motor combined with 60A ESC with XT60 Connector and 4S LiPo battery give the F-35 the speed and performance demanding RC jet pilots expect
- Strong, nylon hinges installed on all control surfaces (superior to foam hinges)
- All major components including 70mm ducted fan, brushless motor, electronic speed control, and servos come pre-installed for your convenience
Requires:
- 6 Channel Radio - Select a minimum 6 channel radio from our Radio Collection
- 6 Channel Receiver - Select a minimum 6 channel receiver from our Receiver Collection
- 4 Cell 14.8V 2200 mAh LiPo Battery with XT60 Connector - EPR22004PROX6
- 4 Cell Compatible Battery Charger - Select a minimum 4 cell (4S) charger from our Charger Collection
Product Specifications:
|
Wingspan |
800mm / 31.5in |
|
Length |
1150mm / 45.3in |
|
Flying Weight |
100g / 38.8oz |
| CG (Center of Gravity) | check manual |
|
Power System |
2849-2850kV Brushless Outrunner Motor |
|
Electronic Speed Control |
60A, XT60 Connector |
|
Propeller / EDF |
70mm 12-Blade EDF with Vectored Thrust |
|
Servos |
9g standard gear with 100mm lead : nose gear steering, left aileron, right aileron, left elevator |
| Landing Gear | Full electronic retractable nose and main landing gear with metal trunnions |
|
Required Battery |
4S 14.8V 2200mAh 30C LiPo |
|
Required Radio |
6 Channel |
| Ailerons | Yes |
|
Elevator |
Yes |
| Rudder | No |
|
Flaps |
No |
|
Lights |
No |
|
Hinge Type |
Nylon hinges |
| Material | EPS Foam |
| Skill Level | Intermediate |
| Build Time | 1 Hour |
| Recommended Environment | Outdoor |