-
Overview
-
Spare Parts
-
Q&A
-
Support
Overview
Spare Parts
Q&A
Support
Overview
P-39 Airacobra 1580mm (62.2") Wingspan - ARF from Nexa - NXA1064-001
The Nexa P-39 Airacobra is a 1580mm (62.2") wingspan ARF replica of the Bell Aircraft fighter used by the United States and Soviet Air Force during WWII. It was one of the principal American fighters in service when the United States entered combat. The P-39 was used by the Soviet Air Force, and enabled individual Soviet pilots to collect the highest number of kills attributed to any U.S. fighter type flown by any air force in any conflict. Constructed with high-quality, precision-cut materials, this aircraft is sure to offer consistent and reliable performance in the air.
The P-39 Airacobra is a .50 size electric or gas option scale series warbird with a 1580mm wingspan, constructed primarily from balsa wood and covered with a fuel-resistant covering. This ARF requires assembly and installation of your choice of servos and power system, and includes flaps, painted pilot, machine guns, antenna and other scale details. The large battery hatch affords ample room for either electric or gas setups. Impress at your flying field with this iconic stunner!
Visit the Official Nexa P-39 Airacobra 1580mm ARF Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Features:
- Complete Balsa and lite-ply construction for rigidity and durability
- Covered from tip to tail in scale details including weathering, functional flaps, printed simulated panel lines and rivets
- Fiberglass cowling for strength and durability
- The hand-painted pilot is ready for your added cockpit details
- All control surfaces come out of the box pre-hinged and installed for convenience
- Large battery hatch allows for your chosen electric or gas setup
Includes:
- Nexa P-39 Airacobra 1580mm (62.2") Wingspan - ARF
- Assembly instructions with stage photos
- Fixed gear
- Fiberglass motor cowling
- Wheels
- Servo trays
- Engine mounts
- Fuel drop tank
- Fuel tank
- Radiator air scoop
- Decals and all hardware pack
Requires:
- 7 Channel radio - select a minimum 7 channel radio from our Radio Collection
- 7 Channel receiver - select a minimum 7 channel receiver from our Receiver Collection
- Brushless outrunner motor - we recommend the Admiral GP5 4220-770Kv Brushless Motor
- 85 Amp brushless ESC - we recommend the ZTW Mantis G2 85A ESC with 8A SBEC
- 7x micro servos for ailerons, flaps, elevator and rudder - we recommend SEVEN of the Hitec HS-225MG Ball Bearing Metal Gear Mighty Mini Servo
- Electric retracts - we recommend Nexa 1580mm P-39 Air Cobra Electric Retracts Set
- 5 Cell 18.5V 4000 mAh LiPo Battery - we recommend the Admiral Pro 4000mAh 5S 18.5V 60C LiPo Battery with EC5 Connector
- Electric propeller - we recommend the APC 13x8 Thin Electric Propeller - Black
- 6 Cell compatible battery charger - select a minimum 6 cell (6S) charger from our Charger Collection
Gas Requires:
- 2 stroke engine - we recommend the NGH GT9 Pro 9cc Two-Stroke Engine
- 2 blade gas propeller - we recommend the APC 11x6 Gas Propeller
Nexa ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).
Product Specifications:
Model Scale |
1/9 |
Wingspan |
1580mm / 61.5in |
Length |
1160mm / 45.5in |
Weight |
2500g / 88.2oz |
CG (Center of Gravity) |
82mm from the leading edge of the wing's root |
Power System |
700Kv Brushless outrunner motor for electric or 2-stroke for gas (required) |
Electronic Speed Control |
85A (required) |
Propeller / EDF |
13x8 2-blade for electric or 11x6 gas 2-blade for gas (required) |
Servos |
|
Landing Gear |
Fixed (included) |
Required Battery |
5 Cell 18.5V 4000 mAh LiPo Battery (required) |
Required Radio |
7+ Channel (required) |
Ailerons |
Yes |
Elevator |
Yes |
Rudder |
Yes |
Flaps |
Yes |
Lights |
No |
Hinge Type |
Nylon |
Material |
Balsa and light plywood |
Skill Level |
Intermediate |
Build Time |
6+ Hours |
Recommended Environment |
Outdoors |
Spare Parts
Product Spare Parts
1 - 20 of 20 results
Q&A
Product questions & answers
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center
Support
Product support
Product Manuals:
If you need any additional assistance, please visit the Motion RC Help Center
Customer Reviews
-
Overview
-
Spare Parts
-
Q&A
-
Support
- Regular price
- $26900
- Sale price
- $26900
- Regular price
- $
- (Save $-269.00)
- Unit price
- per
