-
Overview
-
Videos
-
Upgrades
-
Q&A
-
Support
Overview
Videos
Upgrades
Q&A
Support
Overview
Fairchild Model 24 Argus 2357mm (92.79") Wingspan from Black Horse - Balsa Wood ARF - BHFA000(OB) - OPEN BOX
Open Box Details:
- Missing Parts: None.
- Damage/Defects: The outer shipping box has been punctured and has been repaired. The plane is undamaged.
- Builder Notes: Other than the box, this is as new.
IMPORTANT: Open Box merchandise is sold “as-is” and cannot be returned or exchanged under any circumstances (even if additional product issues are found). Open Box merchandise does not include the standard Motion RC warranty. Some Open Box merchandise are customer returns and may show signs of use. Please check the Open Box Details (above) carefully and consider these restrictions before purchasing Open Box products.
The Fairchild Model 24, also known as the Fairchild 24 Argus, is a four-seat, single-engine monoplane designed as a light transport aircraft in the 1930s. It was used by the United States Army Air Corps as and by the Royal Air Force. It was developed from previous Fairchild models and became a successful civil and military utility aircraft.
Designed for operations from relatively unimproved grass airfields, the sturdy undercarriage construction used a vertical oil dampened cylinder above the wheel with a pivoting strut attached to the lower fuselage. The result was a complex but robust undercarriage that could absorb the large loads imposed by rough field operations and could be adapted for the fitting of twin floats for water-based operations.
The model is scaled to approximately 1:4.7 and attention was paid to a true to original appearance and best flight characteristics. The model can be operated using an electric power system or with an internal combustion engine about 30-35cc displacement.
Visit the Official Black Horse Fairchild Model 24 Argus 2357mm Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Features:
- High level of prefabrication right out of the box
- Lightweight, strong, and scale open structure laser cut balsa and plywood construction
- Covered in high quality Oracover
- Heavy-duty pin hinges on all control surfaces
- Pre-drilled hinge mounting holes
- Large easy access fuel tank/battery/servo access hatches with sprung loaded latches
- Painted and detailed dummy radial engine, cockpit and interior included
- Fiberglass control horns with ball link connector
- comprehensive control and fitting accessories included
- Two-piece, plug-in wings simplify transportation and assembly
- Fiberglass cowl and glass reinforced landing gear covers/pants
- Mounts for both electric and gas power options included
- Fully illustrated instruction manual included and also available for download (see tab above)
Includes:
- Black Horse Fairchild Model 24 Argus 2357mm (92.79") Wingspan - ARF
Requires (Electric):
- 6 Channel radio - select a minimum 6 channel radio from our Radio Collection
- 6 Channel receiver - select a minimum 6 channel receiver from our Receiver Collection
- 2500+ Watt Brushless Outrunner Motor - we recommend the Admiral GP35 C6332-175Kv Brushless Motor
- 80+ Amp Brushless ESC - we recommend Castle Creations Phoenix Edge High Voltage 80A ESC
- 7x 45g standard servos - we recommend HS-625MG
- For 12S setup TWO 6 Cell 22.2V 3500 - 5000 mAh LiPo Batteries - we recommend Admiral 5000mAh 6S 22.2V 50C LiPo Battery with EC5 Connector Multi-Pack (2 Batteries)
- 2 to 1 EC5 series adapter - we recommend BenchCraft EC5 2 to 1 Series Adapter
- 20 x 8E to 21 x 10E 2 blade electric propeller - we recommend APC 20x12 Thin Electric Propeller
- 6 Cell compatible battery charger - select a minimum 6 cell (6S) charger from our Charger Collection
Requires (Gas):
- Engine: 30 - 35cc 2-stroke, NGH GT35 recommended
- Gas Propeller: 18x10 - 20x8
Black Horse ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).
Product Specifications:
Model Scale |
1/4 Scale |
Wingspan |
2357mm / 92.79in |
Length |
1610mm /63.38in |
Weight |
7kg / 15.4lbs |
CG (Center of Gravity) |
160-165mm from leading edge of wing root |
Power System |
2500 Watt+ Brushless Outrunner Motor or 30 - 35cc 2 Stroke (required) |
Electronic Speed Control |
80+A (required) |
Propeller / EDF |
20 x 8E to 21 x 10E 2 blade (required) |
Servos |
|
Landing Gear |
Fixed |
Required Battery |
TWO 6 Cell 22.2V 3500 - 5000 mAh LiPo Batteries (required) |
Required Radio |
6 Channel (required) |
Ailerons |
Yes |
Elevator |
Yes |
Rudder |
Yes |
Flaps |
Yes |
Lights |
Optional |
Hinge Type |
Nylon Heavy Duty pin hinges |
Material |
Balsa and plywood |
Skill Level |
Intermediate |
Build Time |
6+ Hours |
Recommended Environment |
Outdoors |
Videos
Product Videos
Upgrades
Product Upgrades
RunCam 6 Action Camera 4K/30FPS with Lens Protection, ND Filter, and SD Card
SKU: RC-RUNCAM6-4K-ND128G
$12499
1 - 8 of 8 results
Q&A
Product questions & answers
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center
Support
Product support
Product Manuals:
If you need any additional assistance, please visit the Motion RC Help Center
Customer Reviews
-
Overview
-
Videos
-
Upgrades
-
Q&A
-
Support
- Regular price
- $60900
- Sale price
- $60900
- Regular price
- $65900
- (Save $50.00)
- Unit price
- per
