Clark TK50S Control Board Information

TK50S Wiring Diagram

Features:

  • TK50 uses a 4-CH conventional PWM or 10-CH S.BUS RC system to control the RC tank's forward / backward movement, sharp turning, pivoting, turret rotation, and gun barrel elevation at variable speed
  • Ultrasonic ESC x3 for two track motor and turret rotation
  • Carefree reversing
  • Ultra low turn-on resistance FET for track motor ESC
  • Support gun barrel stabilizer (G2 variant)
  • 22KHz, 8-bit high quality sound with digital sound mixer
  • Maximum of 5 channels of sound track, main gun, turret rotation, gun barrel elevation, and engine sound can be generated at the same time
  • 7W sound output power, 8-ohm speaker is recommended
  • 0.8A BEC
  • EPM x2 for gun elevation (EPM1) and turret rotation/gun traverse (EPM2)
  • Wide operating voltage range from 7.2 to 12V
  • Supprts air-soft gun with sound synchronization
  • Supports Tamiya and Heng Long IR battle unit and format
  • Supports RealRecoil servo port
  • Supports recoil solenoid for second machine gun (MG2)
  • G variant supports gun barrel stabilizer
  • Safety shutoff prevents unwanted movement while the signal is lost
  • Miniature design (60mm x 50mm x 20mm) for 1/25 to 1/16 scale RC tanks
  • V2 smoke driver
  • Adjustable low battery threshold