-
Overview
-
Spare Parts
-
Q&A
-
Support
Overview
Spare Parts
Q&A
Support
Overview
Futaba 10J S-FHSS and T-FHSS 10-channel 2.4GHz Radio with R3008SB 8 channel Rx - FUTK9200
This is the Futaba 10J radio system with S-FHSS (frequency hopping spread spectrum) and T-FHSS (Telemetry + frequency shopping spread spectrum) technology. Futaba is known for making the highest quality and most reliable systems on the market. The Futaba 10J is one of the most reliable and most economical 10 channel radios available. Don't trust your models to an off brand unreliable radio with no support or warranty when a radio like this is available. The 10J has a large backlit display, 30 Model memory, telemetry, and many popular features only found on more expensive radios. With all these features and a fantastic price, we think the Futaba 10J is a radio worth owning.
 |
The Power of 2.4GHz The 10J utilizes modern 2.4GHz signal transmission and reception technology that delivers incredible reliability and unparalleled signal strength. |
 |
74 Years of Service and Counting Futaba was founded in Japan in 1948. With over 5,000 international employees and hundreds of thousands of products delivered across generations, Futaba remains leaders in RC technology and products. Fly only the best with Futaba! |
Features:
- 10 channels
- 30 model memory
- 128x64dot LCD screen with backlight
- Synthesized voice with telemetry data
- Airplane, helicopter, glider/sailplane, and multi rotor functions and menus
- One variable knob, five 2-position switches, two 3-position switches, one momentary switch, two digital levers
- Assignable functions to switches and levers (ch. 5-10)
- User-updatable software (requires optional CIU-2 interface, FUTM0951)
- Compatible with all Futaba FHSS receivers
- Wireless data transfer among 10J transmitters
- 2 count-up/-down timers + integrated timer
- Model timer
- Jog dial and three buttons for fast easy programming
- Vibration alerts for use with low battery or other alarm conditions
- Sub-trim and fail-safe (all channels)
- Servo reversing, endpoint adjustment, digital trims, dual rates/exponential & ATL
- Trim step adjustability
- Throttle cut
- Servo cycle with bar graph displays
- Built-in S.Bus programming link for S.Bus servos
- 10-character model and user naming
- Range check mode
- Trainer system
- One year limited warranty through Hobby Services beginning at date of purchase
Airplane Features:
- 6 programmable mixes
- 9 factory-defined mixes
- Flaperons with differential rate
- Flap trim
- Differential ailerons
- Gyro sensitivity
- 5-point throttle & pitch curves
- Throttle delay
- Idle down
Helicopter Features:
- 6 programmable mixes
- 10 factory-defined mixes
- 8 swash plate types
- 5 flight conditions w/delay
- Throttle curve (4 curves, 5 points)
- Pitch curve (5 curves, 5 points)
- Throttle hold & delay
- Swash AFR
- Electronic swash ring
Glider Features:
- 6 programmable mixes
- 3 factory-defined mixes
- 5 wing types
- Gyro sensitivity
- Motor menu
- 2 flight conditions
Multi-Rotor Features:
- 6 programmable mixes
- Gyro sensitivity/mixing
- Center stick alarm
Includes:
- Futaba 10J radio
- R3008SB 8 channel Receiver with telemetry capability
- Neck strap
- On / Off Switch
- Instruction Manual
Requires:
- Four (4) AA size batteries – we recommend Admiral NiMH AA Rechargeable Batteries (4 Pack)
The large backlit LCD display helps make programming easy, as well as clearly showing the timers and telemetry data. |
Aerobatic Home Screen. |
Multi-rotor Home Screen. |
||
Glider Home Screen. |
Helicopter Home Screen. |
Model Type Selection Menu. |
||
Stick Position Alarm. |
Telemetry Data. |
Receiver Type Selection Menu. |
||
Glider Butterfly Setup Menu. |
5-point Throttle Curves. |
Programmable Mixing. |
||
Product Specifications:
Number of Channels |
10 |
Modulation / Protocol |
S-FHSS and T-FHSS |
Band |
2.4Ghz |
Mode(s) |
Mode 1-4 (Default Mode 2) |
| Model Memory | 30 Aircraft |
| Display | Backlit LCD |
| Rotary Knobs | 1 |
| 2-Position Switches | 5 |
3-Position Switches |
2 |
| Slider Switches | None |
| Momentary Switches | 1 |
| Gimbals | Dual Ball Bearing |
| Telemetry | Yes |
| Voice Alerts | No |
| Memory Card Support | No |
| Data Port | No |
| Upgradeable Firmware | Yes with CIU-2 Interface (FUTM0951) |
| Trainer System | Yes (Wired) |
| Dual Rate / Expo | Yes |
| Throttle Cut | Yes |
| Servo Speed Adjustment | No |
| Battery | 4 AA (Required) |
Spare Parts
Product Spare Parts
1 - 6 of 6 results
Q&A
Product questions & answers
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center
Support
Product support
Product Manuals:
Product Updates:
- November 16, 2017 - For a list of compatible receivers please click the Spare Parts tab above.
If you need any additional assistance, please visit the Motion RC Help Center
Customer Reviews
-
Overview
-
Spare Parts
-
Q&A
-
Support
- Regular price
- $42999
- Sale price
- $42999
- Regular price
- $
- (Save $-429.99)
- Unit price
- per
