NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a
support related question that requires immediate assistance, please visit our Help Center
Ask a Question
Thank you for posting a question! Your question will appear on the site once we've answered it.
MJ
Mohammad J.07/13/2019
Q:what voltage is this board designed to run at is 5.25v safe?
Answers (1)
Motion RC
07/22/2019
A:6 volts is the max voltage this board is meant to be used with. 5.25 will be no issue.
G
Grant10/02/2018
Q:Is the gear door sequencer built into this control board? If so, would this control board keep the nose gear door down while the gear is down like on the newer run FW A-10 80mm?
Answers (1)
Douglas
10/02/2018
A:Yes, if you are referring to the A10 board, see my review of the new A10 controller board I received.
New version keeps nose door open
I replaced my original board because I severely bent some of the connectors, and this new one does not close the nose door after gear deployed. I guess this is more scale-like, but might not be so good with high grass or the dreaded bouncy landings.
Read and pay attention to the specs, they mean something!
Purchased this to replace a defective one on my F4 where the landing light function had failed. Heed the warning about 5.5 volts max on this unit but I had...read morePurchased this to replace a defective one on my F4 where the landing light function had failed. Heed the warning about 5.5 volts max on this unit but I had read in a couple of places that 6 volts would still be ok on this Control Board. The F4 had an ESC and receiver upgrade for reverse thrust and the lowest voltage the ESC would provide is 6 volts. The landing light function on the new Board would not work after installation, so time for more research. I found an answer to my questions on RC Groups that makes sense to me. According to those that hopefully know more than I the electronics that make all the magic work with this Board just can not handle the 6 volts my Avian ESC provides. So pay attention to the specs and save yourself some headaches! I did reach out to Motion (thinking I had a defective part) with a Ticket and they never responded. I have requested the Ticket be canceled just in case they do try to respond. I am surprised that MRC did not respond to my Ticket even though this appears to be a problem I caused. Oh well off to order another Board and address that 5.5 volt barrier!
Not much to review about this. Direct 1:1 drop in replacement part for the A-10 and F-4 (and any others that use this FCB) that brings all the cables to...read moreNot much to review about this. Direct 1:1 drop in replacement part for the A-10 and F-4 (and any others that use this FCB) that brings all the cables to one place to condense them without using Y cables for the receiver. Nothing special about it really, and easy to swap in the A-10.
QualityVery WeakWeakOkayGoodVery Good
Value for the MoneyVery LowLowOkayGoodVery Good
Ease of Use / AssemblyVery DifficultDifficultAverageEasyVery Easy
Overview
Q&A
Overview
Q&A
