-
Overview
-
Videos
-
Spare Parts
-
Upgrades
-
Q&A
-
Support
Overview
Videos
Spare Parts
Upgrades
Q&A
Support
Overview
DHC-2 Turbo Beaver 2250mm (88.5") Wingspan from Black Horse - Balsa Wood ARF - BHBV000
The DHC Beaver was introduced in 1947 by DeHavilland as a single engine, high wing monoplane featuring stresses skin, monocoque construction. By the end of production in 1967, some 1600 aircraft had been produced. The late version presented here is a DHC 2T Turbo Beaver and is a development of the original piston-powered plane. The Beaver has gained a well-deserved reputation as the "workhorse of the north".
The model is scaled to approximately 1:6.7 and attention was paid to a true-to-original appearance and best flight characteristics. The model can be operated using an electric power system or with an internal combustion engine about 20-35cc displacement.
Visit the Official Black Horse DHC-2 Turbo Beaver 2250mm Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Features:
- High level of prefabrication right out of the box
- Lightweight and strong, laser cut balsa and plywood construction
- Finished in high quality Oracover covering
- Aerofoil section tail surfaces
- Large, scale, pre-hinged fuel tank/battery/servo access hatches with sprung loaded latches
- Painted and detailed cockpit, pilot and interior included
- Fiberglass control horns and clevises
- comprehensive control and fitting accessories included
- Two-part bolt on wing for ease of transport, assembly and storage
- Fiberglass cowl and landing gear covers
- Mounts for both electric and gas power options included
- Fully illustrated instruction manual included and also available for download (see tab above)
Includes:
- Black Horse DHC-2 Turbo Beaver 2250mm (88.5") Wingspan - ARF
Requires (Electric):
- 6 Channel radio - select a minimum 6 channel radio from our Radio Collection
- 6 Channel receiver - select a minimum 6 channel receiver from our Receiver Collection
- 1500 – 2000 Watt Brushless Outrunner Motor - we recommend the Admiral GP20 6320-295Kv Brushless Motor
- 100-120 Amp Brushless ESC - we recommend ZTW Skyhawk 130A ESC High Voltage with 10A SBEC
- Electric propeller - we recommend the APC 18x12 Thin Electric Propeller
- 7x 45g standard servos - we recommend HS-625MG
- 6 Cell 22.2V 5000 mAh LiPo Battery with EC5 connector - we recommend Admiral 5000mAh 6S 22.2V 50C LiPo Battery with EC5 Connector
- 6 Cell compatible battery charger - select a minimum 6 cell (6S) charger from our Charger Collection
Requires (Gas):
- Engine: 20 - 35cc 2 or 4-stroke. GT25 2-stroke/ GF-30 4-stroke recommended
- Gas Propeller: 15x8 - 16x10 (2 Stroke) 15x10 - 17x10 (4 Stroke)
Black Horse ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).
Product Specifications:
Model Scale |
1/7 Scale |
Wingspan |
2250mm / 88.58in |
Length |
1675mm / 65.94in |
Weight |
5500g / 12.1lbs |
CG (Center of Gravity) |
Refer to manual |
Power System |
6S-compatible 110 size Brushless Outrunner Motor or 20 - 35cc 2 or 4-stroke (required) |
Electronic Speed Control |
100 - 120A (required) |
Propeller / EDF |
18x5 - 20x12 (required) |
Servos |
|
Landing Gear |
Fixed |
Required Battery |
6S 22.2V 5000mAh LiPo (required) |
Required Radio |
6+ Channel (required) |
Ailerons |
Yes |
Elevator |
Yes |
Rudder |
Yes |
Flaps |
Yes |
Lights |
No |
Hinge Type |
Fiberglass |
Material |
Balsa and plywood |
Skill Level |
Intermediate |
Build Time |
6+ Hours |
Recommended Environment |
Outdoors |
Videos
Product Videos
Spare Parts
Product Spare Parts
Hitec HS-625MG Ball Bearing Metal Gear Standard Servo Airplane Multi-Pack (7 Servos)
SKU: HRC6005-001
$21700
1 - 28 of 28 results
Upgrades
Product Upgrades
RunCam 6 Action Camera 4K/30FPS with Lens Protection, ND Filter, and SD Card
SKU: RC-RUNCAM6-4K-ND128G
$12499
1 - 8 of 8 results
Q&A
Product questions & answers
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center
Support
Product support
Product Manuals:
If you need any additional assistance, please visit the Motion RC Help Center
Customer Reviews
-
Overview
-
Videos
-
Spare Parts
-
Upgrades
-
Q&A
-
Support
- Regular price
- $53900
- Sale price
- $53900
- Regular price
- $
- (Save $-539.00)
- Unit price
- per
