-
Overview
-
Spare Parts
-
Upgrades
-
Q&A
-
Support
Overview
Spare Parts
Upgrades
Q&A
Support
Overview
Antonov An-2 2425mm (95.47") Wingspan from Black Horse - Balsa Wood ARF - BHM1015-001
The Antonov An-2 biplane is a Soviet aircraft produced from 1947 to 2001, and is a popular choice for military and civilian operators worldwide. Famous for its ability to take off and land from difficult runways, its durable airframe and impressive payload capacity are ideal for forestry, agriculture and a variety of other purposes. Variants of the An-2 include crop-dusters, water-bombers, flying ambulances, seaplanes and lightly armed combat models.
The model is scaled to approximately 1:5 and attention was paid to a true to original appearance and best flight characteristics. The model can be operated using an electric power system or with an internal combustion engine about 65-100cc displacement.
Visit the Official Black Horse Antonov An-2 2425mm Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
 |
Factory Weathered Printing The printing on this model has a realistic weathering complete with rivet and panel line detail that elevates the model to a whole new level of scale appeal. |
 |
Naca Airfoil Design For Improved Airflow The Antonov An-2 utilizes a Naca airfoil design which maximizes airflow above and below each wing for increased lift and performance. |
 |
Electric Power The Antonov An-2 uses an electric power recommendation with ample room for your electronics but can accept a gas power setup as well. |
 |
Large Wingspan The impressive 95.4" wingspan offers impressive presence both in the air and on the ground. |
Features:
- High level of prefabrication right out of the box
- Lightweight, strong, laser cut balsa and plywood construction
- Panel lines and details printed directly onto the pre-applied, high quality covering
- Recessed hinges on all control surfaces
- Pre-drilled hinge mounting holes
- Heavy-duty pin hinges on all control surfaces
- Large easy access fuel tank/battery/servo access hatches with spring loaded latches
- Painted and detailed cockpit, pilot and interior included
- Fiberglass control horns with ball link connector
- Comprehensive control and fitting accessories included
- Four-piece, plug-in wings simplify transportation and assembly
- Fiberglass cowl
- Mounts for both electric and gas power options included
Includes:
- Black Horse Antonov An-2 2425mm (95.47") Wingspan - ARF
- Instruction manual
Requires (Electric):
- 12 Channel radio - select a minimum 12 channel radio from our Radio Collection
- 12 Channel receiver - select a minimum 12 channel receiver from our Receiver Collection
- 180Kv Brushless outrunner motor - we recommend the Admiral GP60 8925-180Kv Brushless Motor
- 120 Amp brushless ESC - we recommend ZTW Skyhawk 130A ESC High Voltage with 10A SBEC
- 2x 2S 2000-3000mAh LiPo or LiFe receiver packs - we recommend Admiral 2100mAh 2S 6.6V LiFe Battery with XT60/JR/Futaba Connectors
- 10x high torque servos - we recommend 10 Hitec HS-645MG Ultra Torque Ball Bearing Metal Gear Standard Servos
- For 12S setup TWO 6 Cell 22.2V 5000 - 5500mAh LiPo Batteries with EC5 connector in series - we recommend Admiral Carbon 5100mAh 6S 22.2V 70C LiPo Battery with EC5 Connector Multi-Pack (2 Batteries)
- 2 to 1 EC5 series adapter - we recommend BenchCraft EC5 2 to 1 Series Adapter
- Electric propeller - we recommend a APC 24x14E propeller
- 6 Cell compatible battery charger - select a minimum 6 cell (6S) charger from our Charger Collection
Requires (Gas):
- Engine: 65-100cc gas
- Gas Propeller: F
Black Horse ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).
Product Specifications:
Model Scale |
1:5.5 Scale |
Wingspan |
2425mm / 95.4in |
Length |
1710mm / 67.3in |
Weight |
9600g / 21.1lbs |
CG (Center of Gravity) |
Refer to manual |
Wing Area |
130.12 dm2 |
Wing Loading |
73.78 g/dm2 |
Power System |
180Kv Brushless Outrunner Motor or 65-100cc 2 or 4-stroke (required) |
Electronic Speed Control |
HV 130A (required for electric) |
Propeller / EDF |
24x14 for electric, follow engine manufacturer's guidelines for gas (required) |
Servos |
|
Landing Gear |
Fixed |
Required Battery |
TWO 6 Cell 22.2V 5000-5500 mAh LiPo Batteries with EC5 connector in series (required for electric) and 2x 2S 2000-3000mAh LiPo or LiFe receiver packs |
Required Radio |
12+ Channel (required) |
Ailerons |
Yes |
Elevator |
Yes |
Rudder |
Yes |
Flaps |
Yes |
Lights |
No |
Hinge Type |
Nylon Heavy Duty pin hinges |
Material |
Balsa and plywood |
Skill Level |
Intermediate |
Build Time |
6+ Hours |
Recommended Environment |
Outdoors |
Spare Parts
Product Spare Parts
1 - 29 of 29 results
Upgrades
Product Upgrades
RunCam 6 Action Camera 4K/30FPS with Lens Protection, ND Filter, and SD Card
SKU: RC-RUNCAM6-4K-ND128G
$12499
1 - 8 of 8 results
Q&A
Product questions & answers
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center
Support
Product support
Product Manuals:
If you need any additional assistance, please visit the Motion RC Help Center
Customer Reviews
-
Overview
-
Spare Parts
-
Upgrades
-
Q&A
-
Support
- Regular price
- $1,14900
- Sale price
- $1,14900
- Regular price
- $
- (Save $-1,149.00)
- Unit price
- per
